Tech tips to edit
Tech tips to edit
How to configure a post to write the user name in the NC program header
When the same post-processor is executed independently by different users […]
Did you know CAM-POST has a command that allows inserting fillets between non tangential moves while in diameter compensation?
Filleting inserts tangential circular or helical moves between consecutive linear […]
How to resolve user count issues when using a floating license from ICAM Technologies
All floating licenses provided by ICAM are issued for a […]
Did you know that ICAM allows you to integrate your post-processor to your CAM system?
To setup CAM-POST to run within your CAM system, you […]
How to control automatic tool calibration in Mastercam
Some machines offer a WIPS (Wireless Intuitive Probe System) option, […]
How to display the total cycle time at the beginning of a program
How to display the total cycle time at the beginning […]
Do you know how to switch between G98 and G99 canned cycle retract settings?
Fanuc controls provide modal G codes that control where the […]
SmartPATHTM for Automatic Tool Path Optimization and Migration
Machining tool paths are divided to cutting and positioning (i.e., […]
Did you know that ICAM has a Manufacturing Extractor for different CAM systems?
ICAM’s Manufacturing Extractor is an advanced tool allowing users to […]
Did you know that ICAM Virtual Machine allows for Material Removal Simulation and 3D Measurement?
Did you know that ICAM Virtual Machine allows for Material […]
Did you know that CAM-POST allows you to create dialog windows?
The CAM-POST QUEST development module allows you to create dialog […]
How to define right-angle heads with CAM-POST
For machines with right angle and other forms of exchangeable […]
How to select workpiece compensation in CATIA
Workpiece compensation (e.g., G54, G55…) adjusts the axes of the […]
How to generate post-processor commands in CATIA
CATIA uses a PPTable to create the aptsource file that […]
How to run CAM-POST from CATIA
ICAM’s CAM-POST post-processor is capable of running a wide variety […]
How to configure rotary axes
For the CAM-POST developer, it can sometimes be confusing to […]
How to use winding to prevent rotary turn-around (RTA) due to rotary travel limits
While some 5-axes milling centers may have an unlimited rotary […]
How can post-processors help you avoid reprogramming
Does the following scenario sound familiar? You spent hours programming […]
Trunnion-Table Mills: Can operators see the workpiece?
One of the common shortcomings of trunnion-table 5-axes milling centers […]
Did you know that CAM-POST can simulate the cutting of in-process stock?
Material removal simulation can be used to verify the cutting […]
Did you know that multiple-turn helical motions are now supported in Version 20?
On many CAM systems, thread milling and hole milling operations […]
Did you know that CAM-POST Version 20 has macro features that simplify the output of a tooling summary at the start of the program?
A new “Print tooling summary” RMD action is available in […]
